Ideally Architecture

http://www.idealmimarlik.com/EN/stand.html

Site Search

stand

Displaying search results from 185 results are found.

WORKS


CONTENT

Sketch


Detail

Maxima Exhibition Stand


Detail

Maktek Eurasia Fair-h-42


Detail

Maktek Eurasia Fair-h-42

The simplest terms, in the office of the exhibition area exhibition stand. Allocated to you at the fair area, your company, your product, your services, you register, your customers, your guests be seeing; Your Display your products, your company's office during the fair, to use as a showcase area.
For this reason, a prestigious exhibition stand during the exhibition will be the face of your company structure. People who visit the fair, the first impression about your company take your stand. Your office, factory, for the company's booth to show due diligence in our center is extremely important. Serious cost of introducing the best way for your company's booth at the fair participating in the most important tool.
In addition, short-term events fairs as soon as possible to attract the attention of visitors due to the features of the booth should be. Customers of other companies in the same industry, the most important tool you will have to show at the exhibition stand.
 


Detail

Maktek Eurasia Fair-h-42


Detail

Maktek Eurasia Fair-h-42

The main three types of exhibition stands can be handled. Exhibition stands in the standard package provided by the company that organized, usually made of wood with a special design for your company produced a special exhibition stands, modular system designed specifically for your company and modular exhibition stands still.


Detail

Maktek Eurasia Fair-h-42

When you decide to have your exhibition stand will face a stark choice. Do you want to stand, I rent or buy you should do? Either option has its advantages as well.
There are many advantages of leasing. First of all, helps you keep a lower level of spending prior to the fair. Installation, removal, storage, transportation, businesses do not need to spend your time. Over the years, the section dimensions and geometry changes in the fair area where you will have no problem. In terms of both design and material joined to the fair every year, a brand new stand.
However, slightly higher than in the first place may also be possible to purchase at a cost stand. This may be a more economic solution over the years. However, at this point, some points should be noted. Stand after the initial setup when you purchase both the dismantling, the need for transportation and storage, as well as the exchange of old and worn parts can be economical selection of costs over time. In addition, this work can stop you from concentrating on the core business of your company's time and effort it takes. Furthermore, the new designs will shut your door.


Detail

Maktek Eurasia Fair-h-42


Detail

Maktek Eurasia Fair-h-42

Each booth as well as the cost of products and services consist of various elements. To summarize them in an outline possible to speak of four major cost item. These items are, respectively, the design, materials, elements of visual presentation, production, transportation, installation and other services.
 


Detail

Maktek Eurasia Fair-h-42


Detail

Maktek Eurasia Fair-h-42


Detail

Maktek Eurasia Fair-h-42

Exhibition organized firms, which give participants a relatively cheap standard package stands. However, this stands firm to stand out among the other participants will make no contribution is extremely ordinary and simple stands with the colors of your company's corporate identity and product yansıtamamaktadırlar in any way.
Moreover, at first glance, this kind of economic Although they are soft and pretty image on the company's proven track record stands invested resources and efforts to bear fruit also prevents the fair. Other companies and their needs much more remarkable custom built exhibition stands before you attract the attention of visitors.
For this reason, the fair representation of your investment worthy of the prestige of your company to provide and receive data using this kind stands particularly recommended.
Specially designed for your company, or replace them with custom modular exhibition stands, exhibition stands upon withdrawal of attention and provide desired presentation provides a lot more opportunity.


Detail

Maktek Eurasia Fair-h-42


Detail

Maktek Eurasia Fair-h-42

A designer draws taking into account the customer's needs first and foremost trade fair stand. The customer's business arm, he wants to do at the fair activities, demonstrating products, where the size and location of the exhibition, visitors are requested to provide you with the ways of communication are decisive factors in this context. This is a complex and inter-related needs and factors for the square meters of exhibition stand also makes it impossible to give a unit price basis.
All this is melted in a pot in the light of the customer's budget presents the optimum solution is the most reasonable cost. During the process of communication between the designer and the customer utmost importance. For this reason, a direct contact with the designer as much as possible participants have the opportunity to explain the pass and demands unmediated search firm, the most important feature of an exhibition stand.
 


Detail

Maktek Eurasia Fair-h-42


Detail

Maktek Eurasia Fair-h-42

Fair held once a year and in most cases is an organization which is not an alternative to the full. Therefore, the error in the lifted process. The exhibition will be a problem with your stand may result in loss of investment, such as your company in front of all your plans for the year can cause the disruption.
This is why making an exhibition stand on time and exactly as you want everything to be extremely important. The fair booth, which will guarantee that the company's professionalism, communication with you, experience, references, design and production of its own on-site subcontractors performs yaptırmayarak.
So who are aware of the seriousness of the work for you in their advertised at the same time aware that his stand, fair, serious and want to work with companies that trust is a prerequisite for efficiency you can get.


Detail

Maktek Eurasia Fair-h-42


Detail

Maktek Eurasia Fair-h-42

Stand type, the size, it contains elements of decor, as a general rule, depending on the nature of the products showcased decor stands in manufacturing and installation of custom stands modular system can be said that by the time a lot more.
Extremely limited for the installation of the stands before the opening of the exhibition is given a period of time taking into account the time of the stand can be completed and delivered to the customer pre-operation and co-ordination needed to make it clear that serious.


Detail

Maktek Eurasia Fair-h-42


Detail

Maktek Eurasia Fair-h-42

Objectives of your company and your products on the fair presentation of katılmaktaki that you will need in order to explain them to visitors all kinds of visual material for exhibition stands can find a place for itself. However, their experience and creativity to striking and eye-catching in a way that it requires a process.
General layout of the exhibition area, your products and your company's characteristics, preferences, and so do the design stage of the stand. be decisive in this respect and promote yourself, your booth visitors will help you capture any kind of visual materials, posters, banners, vinyl printing, film or presentation stand to benefit as the optimal means to make a preliminary assessment of detailed tasarımcınızla very great importance and mutual exchange of ideas is.


Detail

Digital Printing

Digital printing will give to the wholesale and retail orders as you gain peace of mind to ensure that as a company that stands behind dönecektir.Ürünlerinin matter is of vital importance for us.
 
What can we do?
canvas Poster
banner
Flag
fabric Printing
Large size Photo Printing
Large size Poster Printing
streamer
party posters
Election posters
Pennant Decorations digital flag colors
Digital printing materials
Digital printing inks

Detail

Hostess Rental

Host and hostesses stand is when fairs, product, service, regardless of the visitors to give the impression that best fits your company's profile team. Our professional team, friendship, hard work, visualization, and the success of human relations will give the best service to your visitors.
Welcome and orientation fairs very important issue. The decor is that you will demand high-quality staff of the Istanbul Expo visitor traffic regulation and calls on setting the host and hostesses are experienced or experienced.
Employee training information by us in accordance with your request, images, and experiences shared.
Exhibition booth for the team, please contact the appropriate host and hostess solutions.

Detail

Floor Coverings

Istanbul Expo Decor, laminate flooring medium density fiberboard (MDF) or high density fiberboard (HDF), and the production of the two side coated paper decor, top coat, balance sheet materials are used, such as office and residential flooring is usually used in enclosed areas, massive parquet and laminated flooring products as an alternative to a higher product group. Smoothing process, planning, such as solid flooring laminate flooring does not require polishing, scratch-proof and easy to wear. Easy to be applicable to a natural, decorative and warm appearance, must have sufficient physical mechanical properties, hygienic construction, reasonable price, easy to clean, environment-related positive features, such as is found in plenty of reasons, first in Europe and the United States, the country in the years following the widespread use of floor coverings accepted and managed to take market share in an active market. Depending on the parquet floor made ​​you want to stand. In this system, if you wish 10cm. Upgrading can be done.


Detail

Floor Coverings

Decor Fair in Istanbul, Stand floor carpet may be preferred. Appropriate sample sizes with the desired color and the desired product is obtained.


Detail

Wood Exhibition Stand

Ideal Architecture; in our wooden stand applications; We create original designs with products based on chipboard, particle board, lacquer, timber, wood, wooden stand, wooden modular, design, interior architecture, exterior architecture, economic price and quality service agreement.

Wooden Design Stands; wood, iron, gypsum plasterboards using various materials designed and produced wooden stands.

The greatest advantage of Wooden Design Stands is that it is unique and can be designed according to the corporate identity of the customer.

As a result of your wishes and recommendations, wooden stands are designed with the imagination of our designers, wood, iron, etc. is a stand species built from more costly and durable materials.

Wooden Design Stands can be produced for sale on the market.


Detail

Modular Exhibition Stand

Ideal Architecture; Modular exhibition stands, custom exhibition stands, timber construction for participants who want to capture the benefits of lower cost is proving to be an attractive alternative.

Stands the cheapest cost is proportional to the cost of the rental amount is lower than other systems. This system consists entirely of aluminum and suntadan the most common system. However, at the same time, this system is very weak elegance of design fairs Standard (package) is used also as stand system.

Aluminum construction with the corporate identity of your company with the products prepared and you still design a custom modular exhibition stands in the foreground may be the ideal solution for you.

Attaching removable parts are brought together and can be used over and over again'' Modular Stands Stands as'' adladırılırlar. Aluminum and mdflam / suntalamlar modular exhibition came together form stands. However, in order to increase the visual aspect, as well as and various materials can be added to the functionality of the stand.


Detail

Maxima Exhibition Stand

Ideal Architecture; Maxima stands out with elegance and diversity of the systems. Used aluminum profiles aluminum profiles used in this system compared to other systems, more elegant and expensive. The biggest advantage of this system, as well as chipboard and aluminum windows, tulle, plexiglas, the system modules can be used with a special wood that system is that the most admired by the other on my site.


Detail

Product Display Stand

Ideal Architecture; Firms in certain retail outlets (Market Stands, Parfum & uuml; meri Stands, Stand, etc Pharmacy. Etc.) related & uuml; r & uuml; n order to exhibit; plastic (vacuum thermoforming, plexi and injection), metal (steel, profile pipes, wires), wood (MDF, chipboard) and similar materials with the help of the account-taught shelf, hanger, located components, such as baskets, structure As with pedestal, table & uuml; st & uuml; either structure may also suspend sales and marketing of furniture to the common name.


Detail

Product Display Stand


Detail

Product Display Stand


Detail

Product Display Stand

Product Display Stands are divided into several groups in terms of design and usage.

Display stands according to the structure; standing display stands (stand size), counter top display stands (table-top stand), hanger stand (stand parasite) and tasting stand (Stands taste) dr.


Detail

Product Display Stand

Product Display Stands may also be classified according to the raw materials used in production.
The main raw materials used for the manufacture of metal display stand; Sheet, Profile Pipe and Wire. Plastic raw materials; PS, PVC, Pleksi'ye. Wood raw materials; MDF and chipboard.


Detail

Stand Moving and Storage

All of our customers stand between domestic and overseas exhibition centers of transportation and storage services are performed by our professional team.


Detail

About Us

Ideally Architecture; stand design and implementation of 30 people is serving for many years with a professional team.
Quality, rigor and seriousness work has demonstrated the principle which aims to make the company and its business success go to work towards better with each passing day.
Organization of fairs has gained considerable importance in recent years in our country and institutional participation of exhibition stand design and implementation of the company has shown improvement in this area.
Trade organizations that want to hire if you need the best stand design and application prompts you as sale offers our customers. Professional architects and engineers with the original and / or the system is in stand design and carry out their project has been manufacturing and applications with full-time experienced team.
Modules in our own house stands and design of the wooden stand, 3D design and graphics work done by our architects and exhibition space in the corporate identity of the best in terms of expressing the material quality components company with static calculations elicit projects to ignore.
Customers' needs;
* Accommodation
* Catering
* Sound System
* Plasma Tv
* Projection
* hostess
* Catalogue Photography and Printing Service also provides support.
Participation in trade fairs aimed at the thought of your corporate identity Ideally the best way to stand out will be proud to work with you to make your organization from architecture to give you excellent service.


Detail

Stand Services Sector


Detail

Stand Services Sector


Detail

Stand Services Sector


Detail

Stand Services Sector


Detail

Stand Services Sector


Detail

Stand Services Sector

During Ramadan exhibition centers across the country, in shopping malls, shopping centers, exhibition areas, we offer the key to service delivery in-house sales and leasing, including stand and modules all the wood in your organization.


Detail

Stand Services Sector

Hotel, poolside, beach and so on. personalized wooden areas, our modular stand construction and sale requests asks whether different designs are evaluated and put into service quickly and economically as rent....


Detail

Stand Services Sector

Feast of the Sacrifice, Eid al-Fitr and wood that you can apply in all other festivals, the stand may be appropriate or practical application modules are made.


Detail

Stand Services Sector

Your treatment, please contact your dealer or contact us for any point stand applications.


Detail

Interior Design

except corporate exhibition stand design and implementation; Interior Design & Architecture and 3D visualization working in the fields of design, project and office applications. Design Based on the approach that should be a whole, space designing the architecture, user, function, and aesthetic principle has to pay attention to detail. The design process of new materials and technologies in each project in search of a spot to drag the original concern was intended to continue without losing its respect for the modern understanding of nature. After preliminary study design, 3-D presentation of customer projects carried out, if the design is making the necessary arrangements with the transition to the production phase, after completion of the production, the project is completed by the application of a specially prepared product to the place. Until the project is in the mutual evaluations of customer satisfaction achieved, the design work is also underway.

OUR SERVICES IN THIS FIELD;

Architecture and Interior Design and Implementation
Furniture Design
Architecture and Interior Design 3D Visualization Service Office


Detail

Videowall screen

With our video wall screens, you can collect all your interesting busses at your exhibition stand!
Videowall is a giant screen that is created by stacking multiple screens on top of each other or side by side to provide resolution and image quality above normal standards.

The narrowness of the frame thickness of the videowall-forming screens is the most important reason to prevent the losses that can occur in the active area. The industrial panels that form the videowall can have LCD and LED technology, and a videowall usually uses the same display type.

VideoWall products are usually preferred over areas with dimensions above normal. Examples of videowall usage areas are fairs, shopping malls, stadiums, airports, control rooms, news studios, and large public areas.

VideoWall screens created by positioning multiple panels in various matrix shapes have a wide range of uses, especially advertisements and promotions. Panels that make up Videowall are commonly in sizes 46 "and 55".

Videowalls created by placing plasma screens side-by-side ahead of time have started to be produced as narrow bezel from 2010 onwards. Videowall systems were mostly built using thick-framed plasma panels. In the example below, you can see the differences between the VideoWallets which are made up of a group of thick-edged and thin-edged screens.


Detail

Truss Fair Stand

Models and varieties of truss exhibition stands, which have different features in terms of size, are frequently preferred. In the truss system, columns and beams create a highly functional space. The recognizability of the system is important in terms of giving a popularity message. Since it is detachable, it gives the opportunity to make changes easily. It should not be considered only for aluminum material. The lighting system is of a quality that highlights the product and service.

Models and varieties of truss fair stands in fairgrounds are ideal for creating a healthy advertising space. The promotion process takes place on a solid ground.

The stands in question are demanded and preferred by many organizations because they are very modern, stylish and very functional. Truss truss system stands are indispensable for large organizations. It is used in television programs, concerts and many similar events. The reason why it is in demand so often is the perception of greatness it creates. Despite the perception of grandeur and splendor it creates, it is quite easy to install. Since the materials used in its manufacture are very light textured materials, its portability and installation are quite simple. Therefore, it is highly preferred.


Detail

NEWS

AYMOD Shoes Fashion Fair

CNR HOLDING A.Ş.
Cnr Ekspo Exhibition Center Yeşilköy-Bakirkoy- Istanbul

The International Shoe Fashion Fair (AYMOD) organized at CNR EXPO exhibited products produced from children's shoes to slippers, adult shoes, leather bags and accessories. The fair has visited approximately 17 thousand industry professionals, both domestic and foreign.

Handmade shoes and bags attract attention at AYMOD. Polishing of shoes and bags made with 100% natural methods is done with egg whites and it is made with a paste of grass.

The International Shoe Fashion Fair (AYMOD), which guides world fashion in the footwear sector, was held for the 57th time at CNR EXPO Yesilkoy. The fair attracted some 17,000 industry professionals, including 866 foreigners. The fuara, which was hosted by a purchasing delegation from 59 countries, attracted more than 1,400 domestic and foreign brands. Shoe store chains participating in AYMOD in many countries including Italy, Netherlands, Germany, Greece, Russia, Ukraine, Belarus, Saudi Arabia, Qatar, Lebanon, United Arab Emirates and Iran have requested to co-produce with domestic companies.

The fuarda showcased a large number of product groups ranging from children's shoes to slippers, adult shoes to leather bags and accessories, and special stands and stands with handmade shoes and bags attracted a great deal of attention. In the fuard where the stylish shoes were placed, the attention was drawn to the fact that the hand gauntlet bags and shoes were obtained by natural means without using any chemicals. Designer Fatma Menteş said that while making shoe and bag, they polished it with egg whites, and that they made the paste process with gingerbread. Menteş stated that he made a pair of shoes in 10 days and handbags in 3 days and emphasized that handmade shoes prevent the formation of fungus and that it is also important for health.

Women's indispensable hairy shoes
Fuarda 2017-18 Autumn-winter season trends of shoes and saddlery were determined. Next year on men's shoes, thick-soled shoes, posters will be on sale. Classic men's shoes will have brown, burgundy, navy blue, and shoe and burgundy tones will be on the forefront. In next year, women's shoes will be a trend of long stretch outfits made of velvet and shiny fabric. Feathered shoes and velvet sport shoes will be indispensable for women in summer and winter.

Full support from AYMOD
AYMOD was supported by Pozitif Fuarcılık, a subsidiary of CNR Holding, under the support of Turkish Industry Associations (TASD), Turkish Footwear Sector Research and Development Education Foundation (TASEV), Turkey Umum Shoes Manufacturers Federation (TUAF), Istanbul Shoe Craftsman Chamber of Industry (İAESO).


Detail

TUYAP Istanbul Stationery Office Fair

TÜYAP FAIR AND CONGRESS CENTER GREATER ISTANBUL

FAIR ORGANIZER
Tuyap Fair and Trade Fair Services Inc.

Phone + 90 212 867 11 00

Fax + 90 212 867 12 00
OFFICIAL TITLE

Istanbul Stationery Office
EXHIBITOR PROFILE

Packaging and Decoration Products
Band Adhesives
Computer, Photocopy, Printer, Fax and Printing Machines and Side Products
Drawing and Draft Products
Notebook, Organizer, Notepad, Album, Index and Calendars
Filing Products
Educational Publications and Materials
Educational Materials
Label
Paper Disposal and Paper Cutting Machines
Gifts, Greeting Cards, Calendars
Gifts and Promotional Products
Calculators and Author Bases
Hobby and Artistic Materials
Paper and Paper Products
Pens and Pencils
Cartridge, Toner and Filling Machines
Stamp and Machine
Stationery Consumables
Licensed Products
Office materials
Paper and foil for office and private use
School & Briefcases, Suitcases
Toys and Clock
Plastic Card, Binding, Lamination and Spiral Products
Sodium and Luxury Table Top Products
Exhibition stands and shelves
Writing Boards, Board and Meeting Presentation Products
Spelling Tools and Accessories

VISITOR PROFILE

Office and School Type Stationery and Bookstores Authorities
Bag and Luggage Retailers
DMO and Public Authorities Purchasing Authorities
Educational Institutions Administrators
Hobby and Arts Supplies Retailers
Stationery Retailers
Stationery, Office Supplies Materials Chain Markets Authorities
Luxury Consumption and Private Manufacturing Product Satan Shop Authorities
Media and Press Organizations
Preschool Education Centers Administrators
Toys and Gift Retailers
Private Companies' Purchasing Authorities
Advertising Agencies
Artistic Training Centers Managers
wholesalers
Publishers, Press and Disclosure
Other


Detail

Automechanika Istanbul

Açılış saatleri: 10:00 - 18:00

Yer: TÜYAP Fuar ve Kongre Merkezi Büyükçekmece - İstanbul, Türkiye

Fuar alanı: 35.586,5 m² net (2017)

Organizasyonlar: Messe Frankfurt İstanbul Uluslararası Fuarcılık Ltd. Şti. | Hannover Fuarcılık Türkiye Fuarcılık A.Ş.

Türkiye'nin Lider Uluslararası Otomotiv Endüstrisi Fuarı

Automechanika markası orijinal otomotiv. Şirketlerin dünya çapında başarılı fuarlar araçları gelir.

Avrupa'da, Asya'da ya da Amerika'da olsun, Automechanika uluslararası otomotiv profesyonellerine ideal ticaret ve bilgi platformu sunabilmeyi amaçlar.

Messe Frankfurt'un fuar organizasyonu ve dinamik pazarlara yönelik uluslararası uzmanlığı ona Automechanika Fuarının temelini teşkil eder. En önemli hedefimiz katılımcılarımıza ve yerleştirimize tüm etkinliklerimizde eşit kalite bir kalite standardı sunmaktır.


Detail

ISTANBUL PROHUNT AV SHOES AND NATURE SPORTS FAIR

Efem International Fair and Congress. Speed. Inc. İstanbul Prohunt Hunting, Weapons & Nature Sports Fair is the biggest international fair organized in Turkey for hunting and nature. The fair is being organized and growing from 2012 to 2014 with the new concept 'Istanbul Prohunt'.


The organization where all sorts of equipment on sporting shooting and land hunting are exhibited attracts attention since the first year when Turkey was organized especially for its success in the arms industry. Participating companies are taking important steps to develop commercial relations by presenting innovative products that orient the future of the industry to the liking of local and foreign guests in Istanbul Prohunt. Istanbul, a center of attraction; international airports, advanced public transport systems and modern fairgrounds. Istanbul Prohunt; the passion of living and creating nature ...

 

Highlights of Fuad;

- 150 exhibitors and more than 550 brands in agriculture and nature sports,
-The latest developments in the sector and new innovation governance,
-The quality of the globally standard quality which is produced as a result of blending high quality products with fine workmanship,
- Opportunities created in order to open up to new markets and a large buyer's population,
product groups

-Silah and Subsidiary Industry
-Security, Private Security Weapons and Materials
-Electronic and Optical Products
-Blades
-Advertising Tourist
-Aging and Leather Products
- Fishing boat and equipments
-Outdoor Clothing, Outdoor Sports and Camping Materials
-Road Vehicles
-About Repair Maintenance
-Av Dogs
-Automachinery, Plates and Polygons


Fair Place

Istanbul IDTM Exhibition Center, 34149 Yeşilköy Istanbul


Detail

TÜYAP Building Fair

YAPI FUARI - TURKEYBUILD is an international BUILDING MATERIALS and TECHNOLOGIES Summit which has been growing every year since 1978, offering its services in world standards with its increasing number of exhibitors, enriched products and services and increasing domestic and foreign exhibitors.

Construction Fairs - Turkeybuild, Istanbul, Ankara and Izmir, are the leading fairs of Turkey and the regions. Fairs, which are a reliable brand in the national and international arena, grow every year and increase the benefits provided by the sector. Yapı Fuarları - Turkeybuild, representing the Turkish building industry in international arena, brings together 180,000 local and foreign visitors throughout the year. Yapı Fuarı - Turkeybuild Istanbul, which is one of the five major building fairs in the world, has the feature of being "the biggest building material fair of the region including Balkans, CIS countries, Middle East and North Africa which Turkey is in."


Detail

Interior and Exterior Design and Application

Apart from the design and application of the corporate fair stand; Interior Design & Architecture and 3D Visualization. By taking the approach that the design should be a whole, it has taken the principle of not giving importance to architecture, user, function, aesthetics and details when designing the space. He aimed to maintain his modern understanding with respect to nature with the concern of dragging the design process to a unique spot in search of new materials and technology in every project. After the design preliminary work, the project presentation is made in 3D and the project is made by making the necessary arrangements if necessary in the design. After the production is completed, the project is completed by applying the specially prepared products to the place. As far as customer satisfaction is provided as a result of mutual evaluations in the projects, design work is also being continued.

THIS SURGERY SERVICES;

Architectural and Interior Design Project and Application
Furniture Design
3D Visualization Service for Architectural and Interior Architectural Offices


Detail

ANFAS FoodProduct Fair

ANFAŞ FoodProduct Fair, which has become an international meeting place for the food sector, meets with the stakeholders of your sector for the 25th time.

Turkey stands out as a market with high growth potential especially for the food sector and its suppliers with its geographical position and tourism developments. Turkey, which is expected to be among the top 10 in the world economy until 2023, has realized export of 16 billion dollars in food sector with 11.2% share in 2016.

The food sector has contributed significantly to the development of the country's economy by generating $ 5.3 billion in surplus value.

ANFAS presents an international trade platform to its participants and stakeholders with its renewed fairs. The Ministry of Culture and Tourism, Ministry of Food, Agriculture and Livestock, TOBB (Confederation of Turkish Chambers and Traders), TESK (Confederation of Turkish Tradesmen and Craftsmen) Mediterranean Exporters Association), BAKA (Western Mediterranean Development Agency), DEIK (Foreign Economic Relations Board), TÜROFED (Federation of Hoteliers of Turkey), the leading institutions, federations and associations of the business association and domestic and international promotion activities are conducted.

ANFAS, which underwent a radical change in FoodProduct and HotelEquipment fairs this year, combines the two most important fairs of the tourism sector under the roof of a renovated exhibition area of ​​60.000 m2 in total with 40.000 m2 closed and 20.000 m2 open.


Detail

MUSIAD EXPO

"Business; 16 MUSIAD EXPO will invite the investors to take part in the growth and joint venture with the slogan "16. MÜSİAD EXPO will meet the business world to build global business networks, to have a say in global markets, to strengthen SMEs and to accelerate effective growth and B2B addressing new business opportunities it will be.

MÜSİAD EXPO, which welcomes professional visitors from many countries of the world, will hold 8 holdings and more than 700 MÜSİAD members domestic and foreign companies in CNR EXPO on November 9-12 this year. 15. EXPO, which brings together 7,250 distinguished businessmen from 123 countries and over 100 thousand visitors and business world in MUSIAD fair, is expected to see a significant increase in visitor numbers this year. Fuarda will meet many different sectors this year, such as environmental and building materials, construction, textile, automotive, machinery, furniture, food, information technology and defense industry.

Especially for producers and exporters companies, it is very important to reach new developing markets and to use international fairs in this direction. One of the strongest marketing circles, fairs are of great importance for companies that do not want to lose their competitive edge and want to grow. In this context, MUSIAD EXPO is even more prominent this year. This year's priority target of the fair, which welcomes many visitors and procurement delegations from abroad, Africa. MUSIAD, which is heading to the African market this year, aims to increase trade between the two countries by providing businessmen in Nigeria, Nigeria, Ghana, Ivory Coast, Ethiopia and South Africa to participate.

20. IBF (International Business Forum)

The IBF-International Business Forum, founded by Muslim businessmen in order to establish a global business network, is managed by an executive board (BOG) consisting of heads of business associations from 22 countries and offers a reliable global business network.

The international business platform, which is held once a year with the congress and its accompanying commercial activities, will take place at WoW Hotel on November 9-12, 2016 at the same time as the 16th MUSIAD EXPO for the 20th time this year.

T.C. The President and the T.C. The Islamic Cooperation Organization, the Standing Committee on Economic and Commercial Cooperation, coordinated by the Ministry of Development, has identified the IBF as the "Official Business Forum" since 2006 as the main topic of this year "Innovation Economy and Investment Ecosystem". It is aimed at raising awareness of how to find and benefit from innovation and entrepreneurial dynamic ecosystem, whether it is a company that wants to develop and grow its business, or an entrepreneur with ideas.

The opening theme of the forum, which will take place in three sessions, is "success behind Turkey's resilient economy". In addition to the main session, the three session titles also cover issues that emphasize the importance of funding, market success and regulation to set up the innovation economy and investment ecosystem. "How to build an entrepreneurship ecosystem," which focuses on the "how to invest and grow your business" investment, "the commercialization of technology and market success" for sales success and finally the role of stakeholders for a productive enterprise ecosystem. .

3. High Tech Port MUSIAD

High Tech Port MUSIAD's third place, T.C., has attracted attention as a vision project that MÜSİAD has put forth in order to get rid of the Middle Income Salt of Turkey. Support and participation of the President of the Republic of Turkey, support and participation of the Turkish Ministry of Defense, T.C. Will be organized in a separate hall within the 16th MÜSİAD EXPO fair on November 9-12 with the support of the Undersecretariat for Defense Industries and the support of industrialists.

This year, more than 20 countries will be interviewed by the defense minister, force commander, airline companies, high-tech companies in Turkey and major producers such as Airbus Boeing and Lockheed Martin. It will be presented.

While the technological products of Turkey are being screened for the world markets with the project of High Tech Port, which is described as a future compass pointing to the direction of the Turkish ship, Turkey's bringing together of high technology companies and target markets, in this sense, aims to create achievements.

ABOUT MUSIAD EXPO

MÜSİAD EXPO brings new opportunities for commercial cooperation and global partnerships by bringing together participating businessmen and investors. With great trade capacity and hearted organization, foreign businessmen from Asian countries to European countries to Turkish republics are being held in Istanbul every two years since 1993 with domestic and foreign participating companies.


Detail

TÜYAK Fire and Security Symposium and Exhibition

The biennial "Fire and Security Symposium and Exhibition will be realized with the support of national and international institutions, contributions of domestic / foreign universities and fi rma representatives.

Symposium and exhibition; to introduce new devices and systems that detect, warn, and respond to environmental risks to fire, sabotage, depression, business accidents, to environmental risks, to explain the developments and new design principles in today's technologically appropriate protection and prevention systems, to discuss the problems and to bring all the stakeholders of the fire and security sector together and to explain the developments in related regulations and standards. The main theme of the International Symposium will be "Fire Safety and Risk Management in the Fire" and priority will be given to these issues.

The symposium will be the meeting place of TÜYAK sector where the scientific and technological developments in the field of fire and security will be discussed and the technological developments where designers, practitioners, researchers and administrators come together and new products will be exhibited. Participation in the symposium is free.


Detail

ISK - SODEX Istanbul

SK-SODEX Istanbul Tüyap Fair and Congress Center.
ISK-SODEX Istanbul, one of the leading fairs of the sector, is an event that should be added to the agenda of everyone who wants to follow the latest trends and developments in the sector.

ISK-SODEX is a participant in the main headings of heating, cooling, air conditioning and ventilation with the help of information exchange with expert participants and visitors from all over the world, as well as ongoing support programs during the fair and cooperation with the industry's leading associations great facilities. ISK-SODEX Istanbul Fair, which offers opportunities to establish and develop business connections and to get to know the latest innovations and developments in the sector, has also been recognized in the sector by its exhibitors and visitors.

The fair, which was first organized in 1997, once again underscored its place and position in the sector with the point it reached in its latest edition, 2016, and contributed greatly to the exports of its sector and Turkey.

1,294 participants (including sub-participants)
50.558 m2 net stand area
83,764 visitors from 107 countries (93% are from Europe, 2% from America, 3% from America, 2% from Asia)
92% targeted audience
48% decision-maker
The ISK-SODEX Istanbul Fair, which covers the whole of the heating, cooling, air conditioning, ventilation, insulation, pump, valve, installation, water treatment and solar energy systems, provides an in-depth view of the entire sector.
The ISK-SODEX Istanbul Fair, which will take place at the new location and new date in 2018, aims to be the meeting point of the sector again.

product groups

A. HEATING SYSTEMS AND ELEMENTS

BURNER
BOILER
FLOOR HEATERS
COMBI
ALTERNATIVE AND RENEWABLE ENERGY
SHOOTER, THERMOSPHONES AND BOILERS
STOVES
ELECTRIC HEATERS
B. REFRIGERATION SYSTEMS AND ELEMENTS

COOLING GRUPLARI
COOLING BELLOWS
CLOSED CIRCUIT LIQUID COOLING SYSTEMS
COLD ROOMS
COOLING COMPRESSORS
COOLING COMPONENTS
C. AIR CONDITIONING, AIR CONDITIONING, AIR CONDITIONING SYSTEMS AND ELEMENTS

AIR CONDITIONING DEVICES
FANS
FAN COILS
HEAT RECOVERY DEVICES
AIR FILTERS
AIRWAYS
HEAT PUMPS

D. INSTALLATION SYSTEMS AND ELEMENTS

INSTALLATION ELEMENTS
LPG - LNG SYSTEMS
RADIATORS
PIPING
VALVES
VENTILES (VALVES)
PUMPS
they PRESSURE
INSTALLATION ARMATURES
MEASURING DEVICES AND INDICATORS
WATER COUNTERS
CONNECTORS
WATER TREATMENT, CONDITIONING SYSTEMS AND DEVICES
SEALING ELEMENTS
WAREHOUSES
FIRE INSTALLATION ELEMENTS
E. BATHROOM, SANITARY INSTALLATION PRODUCTS AND FITNESSES

BATHROBE, WASHBASIN, WC
TOILET AND SEWER ACCESSORIES
EQUIPMENT FOR BATH AND WC
PHOTOELLATED BATTERIES
DRAINAGE EQUIPMENT
BINA DISI DRAINAGE DEVICES
PROCESS FLUID AND RAIN WATER USE
PIPE FITNESSES FOR WATER SUPPLY IN CONSTRUCTIONS
BATHROOM FITNESSES
FITNINGS FOR RELATED AREAS
FITNINGS FOR HEATING AND DRINKING WATER HEATING EQUIPMENT
GAS FITNESSES
FITNINGS FOR LIQUIDATED GASES
FIRE EXTINGUISHING AND ANALOG FITNESSES
FITNINGS FOR COOLING ENGINEERING
F. INSULATION PRODUCTS

G. SERVICE GRUPLARI

MECHANICAL, INSTALLATION DESIGN AND APPLICATION
CERTIFICATION SERVICES


Detail

About stands; Frequently Asked Questions!

The simplest terms, in the office of the exhibition area exhibition stand. Allocated to you at the fair area, your company, your product, your services, you register, your customers, your guests be seeing; Your Display your products, your company's office during the fair, to use as a showcase area.
For this reason, a prestigious exhibition stand during the exhibition will be the face of your company structure. People who visit the fair, the first intibah about your company take your stand. Your office, factory, for the company's booth to show due diligence in our center is extremely important. Serious cost of introducing the best way for your company's booth at the fair participating in the most important tool.
In addition, short-term events fairs as soon as possible to attract the attention of visitors due to the features of the booth should be. Customers of other companies in the same industry, the most important tool you will have to show at the exhibition stand.

Detail

Exhibition Stand How should it be?

Customer service and up to date with our new web site is under construction.
 Special stands are used for more than the company's own original design. In general, the processing of the material consists of wood. Special stands, modular stands is that the advantage of a more aesthetically pleasing.
 Assembly and Disassembly is easy, due to the establishment of fairs are often used as soon as possible. Booth Rental costs are lower than the special stands prefer this system is due to the many companies.
 Traditionally all very different and more modern, modular stands. A wide range of exhibitions in the field of freedom of design that you use this system you will easily be noticed. Maxi Plus system do not decide to have one without the other modular system stands.
 Point of sale promotion related to specific products, produced for the purpose of displaying, quite widespread in recent years, the use of Product Display Stands Fancy extremely useful for the exhibition and promotion.
 Materials Exhibition Stands specially developed for Rent, Digital Printing, Hostess Rental, Catring Service, Image and Sound System, Floor Coverings are available in all of the products, such as help.

Detail

Ramadan Stand Rental

During Ramadan exhibition centers across the country, in shopping malls, shopping centers, exhibition areas, we offer the key to service delivery in-house sales and leasing, including stand and modules all the wood in your organization.


Detail

Fair Stand

Your Fair Stand is very important in terms of showing your products correctly and accurately, expressing your company, serving the purpose of the fair you participated in.

Your Fair stand is your workplace where you have joined.

For the first time you will see your firman, your first impressions of the company will be obtained through your booth. In this respect, Fair stands are a matter that should be emphasized.

The fair is the most important element in terms of determining the type of exhibition you want to attend.
You can not create the effect you want in the eyes of a fuard that you have attended for the prestige, and a cheap look at the fuard.

Being informed about stand models, varieties and types before you decide on Fair Stand will ensure you get your business in better quality.

You should know that when you do your preliminary search you may face different stand prices.

You can also investigate the reasons that make up the price differentials so you know what you will pay for what services and materials.


Detail

Production of Fair Stand

Aluminum and mdflam / chipboards come together to form Modular exhibition stands, but they can also be added in different materials to enhance the stand's functionality and visibility.

Unlike wooden stands, which are assembled and disassembled, the stands that can be used repeatedly are called Modular Stands.

At the end of the fair, the modular stands are re-dismantled and stored at other fairs
re-established as the stand of other companies.

It is used for stands made of Wooden Fair Stands of Chipboard / Paperboard or Mdflam.

Special production is used only once. If you want to use the stand again, you should pay attention to this detail in the design and materials used. With careful workmanship, the stand can be stored and re-installed under proper conditions.


Detail

How will the fair stand prices be determined?

Fair stand prices differ depending on the type of stand, design, materials used.

You can find different prices for your exhibition stand using the same design and the same material.

These differences are about the quality of service. You need to take this into account when you get the price for your exhibition stand.


Detail

Fair Stand Ground Systems

Fair floors are also the most popular with 3 types of floors. These;
1. Karolaj (Podium)
2. Parke
3rd Carpet

Karolaj (Podium): The ground system created by placing 18 mm chipboards on specially prepared aluminum carcasses cut in 1 meter x 1 meter dimensions. It is the most elegant floor system that can be used at fairs. It has been raised 8 cm from the ground and is suitable for all types of electrical, water, cable and hose passages under the ground. After the stand is installed, additional wiring can be made by lifting the floor system provided that it is not over weight.

Parquet: The most preferred floor system in fair stands is park. Especially if you want your stand to be supported with foam or raw chipboard under parquet while you are laying parquet on your stand floor. If the parken is laid directly on the floor, there may be parts playing on the floor of the stand due to the difference in level of the floor.

Carpets: If your products are very heavy and they are exhibited on the floor, it will be healthier to choose carpets on your stand floor.

Except these 3 options, you can make your fair stand with different materials, unless you decide what these materials will be, the firm that makes your stand design will choose one of these 3 options.


Detail

Fair Stand Visual Practices

WOODEN STAND
Chipboard and Paint Stands:
Boards should never be glued on the stand walls painted directly on stained paint stalls. Although it may seem less costly and quick to apply in the near term, this practice is certainly not the right application. In such stands
The application of the visuals directly on the stand wall causes the visuals to disappear after a while, as well as the appearance of orange peel in the eyes.
In such stands, the pictures are first applied on Foreks / Dakota. Foreks / Dakota on the visuals are applied to the stand walls with double-sided tape according to the size of the image or with very fine-tipped nails at the exhibition area
Flipchart and / or Mdflam stands:
Depending on the size and number of the images to be used in the stand, sometimes the companies that implement the application can apply the visuals on the Foreks / Dakota and stand walls. This application is not wrong. However, from a visual point of view, the most appropriate application on such stands is to apply foil prints directly to the stand walls. In such stands, the images are applied directly to the stand walls. This application is the most correct application from the visual point of view.

MODULAR STAND
The modular system consists of stanchion walls on stanchions. On the surface, the application of the images on the stencil provides the most elegant and beautiful view
Strofor (foam writing) in the application of the double-sided tape or silicone can be adhered .. However, due to the heat generated by the lights on the fairground area of ​​the double-sided tape does not give a healthy result and the likelihood of falling letters is very high. You should definitely confirm the sticking of the stand company articles with silicone.


Detail

Fair Stand Cleaning

Stand companies prefer to clean their fairings very early in the morning on the opening day of the fair.

For this reason, your booth will be dirty again, even if it is cleaned beforehand, because of the work that continues until the morning of the fair.

Your fair stand is cleaned and delivered to you by the company that made your stand.

However, during the fair your cleanliness will belong to you.

There is always a chance to get a professional service at the exhibition area regarding the cleaning of your booth during the fair.

In this regard, the stand may want your company to help you, and you can agree with a cleaning company for a fee with the suggestion of your stand company.


Detail

Things to be aware of when renting your fair stand

When renting your Fair Stand you should set a marketing strategy.
The products you will exhibit at the fuard should be a part of this strategy.
You should see this stand as a good tool to reach your company goals and objectives and plan all your preparations correctly.
You will now rent it in the direction of the plan you have created, and you will have to identify everything you will need for the stand one by one.
Sockets close to the seating groups, the supply of electricity to the product, the most spectacular of your stand, new product visuals and so on.
Once you transfer all the details you have set up to the company that will make your stand over the project, the only job left to you is to welcome your visit in the most correct way and to tell your company correctly to increase your company's sales in accordance with your fuara participation purpose.


Detail

Fair Stand Electrical Plan And Illumination

Just as we have determined our electricity needs in advance when we decorate a house or office, we have to identify it in advance.
You need to determine the amount of electricity you need at your fair stand and at what points you need this electricity stand before the fair and you should make an electricity plan with the firm that will apply your stand.
There must be a receptacle for the refrigerator and water heater in the storage area of ​​your stand.
It is important that you use a computer in the tables and on the reception desk and in the wall socket.
If you do not have a socket at the points you need, you can create additional sockets with an extension cable from another socket in your stand, but this will create image fouling within the stand.
Your illumination should not be more or less. Excess lighting will cause your booth to overheat excessively while a dark stand will not draw attention to your products.


Detail

Fuar Standımda Bulunması Gerekenler

  • A notebook where you can note the contact information of the Fair Visitors
  • Brochures and catalogs for your products
  • Business card
  • Phone charge
  • Kettle
  • Mini refrigerator
  • Dress hanger
  • Catering materials (sugar, snack, etc.)
  • Tea, coffee, a variety of cold drinks, sugar
  • Cups and spoons
  • Plate
  • Hostess
  • Table Chair

Detail

Fair Stand Color Selection

You should take care to use the corporate colors as much as possible when deciding on the color of your exhibition stand.

You can use the links below to see the options that will make your color choice easier.

PAINT COLORS for Chipboard + Painting Stand
SUNTALAM COLORS FOR PAINTING STAND
FOLIO COLORS FOR MODULER STAND


Detail

What should be on Fair Stand!

  • To get information about the stand company, get the most healthy and correct way references and make interviews with the companies that have done business before .. You can get detailed information about the works which stand company has done before by meeting with several companies you will choose from the reference list of the stand company and even visiting them.
  • You have to make sure that the Fair Stand has a substructure and technical staff that can produce the booth you want and can meet your needs.
  • Before giving the job, you should definitely visit the stand company and the production workshop.
  • You must send the electrical system of your stand at least 15 days before the show.
  • At first glance these works will come to you like a waste of time. You will try to express your company for thousands of visitors for 4 days. Considering the importance of your exhibition stand, it will not be a waste of time but profit.
  • All the visuals and logos to be used in your booth must be sent at least 15 days in advance to the company that will hold the exhibition stand, in the sizes and formats that the stand company requires.
  • It is important to know that your stand company is your solution partner and give you all the necessary support in the preparation and production stages. Work initiated with incomplete information will tear you and your stand firm and cause you to be unable to receive your work on time.
  • The staff you will be assigned to the fuer must make business plans to determine beforehand and make a detailed meeting about the fair.

Detail

Fair Stand Design and Application

Fair design and implementation services that reflect both your company and your products in the most efficient manner with creative solutions that expand the boundaries in limited spaces of the fair areas


Detail

TOS + H Expo | ICC - İstanbul Kongre Merkezi

Messe Düsseldorf GmbH ve yerel ortağı Tezulaş Fuar, Türkiye’nin iş güvenliği ve sağlığı alanında lider ihtisas fuarının konumunu daha da sağlamlaştırmak amacıyla İstanbul Sanayi Odası (İSO) ile iş birliği yapıyor.

İstanbul Sanayi Odası, TOS+H Expo 2022’ye sadece uzmanlığı ve sanayi bağlantıları ile katkıda bulunmakla kalmayıp, aynı zamanda, 14 – 17 Mayıs tarihleri arasında İstanbul’da gerçekleştirilecek olan ihtisas fuarı ile eş zamanlı düzenleyeceği İş Sağlığı ve Güvenliği Sempozyumu ile destek veriyor. Messe Düsseldorf GmbH Genel Müdürü Erhard Wienkamp “Bu yeni ortaklık, Türkiye’de iş sağlığı ve iş güvenliği konularına gösterilen ilgiyi açıklamaktadır. Fuar ile İstanbul Sanayi Odası iş birliğinin, TOS+H Expo’nun Türkiye’deki öncü konumuna katkı sağlayacağına inanıyorum” demektedir.

İstanbul Sanayi Odası’nın konuya ilişkin beyanı da aşağıdaki gibidir: “TOS+H Expo, iş güvenliği ve sağlığı ihtisas fuarı olarak sanayi ve ticaret alanlarından uzmanları bir araya getirecek. İstanbul Sanayi Odası da başta sanayi olmak üzere tüm sektörleri yakından ilgilendiren 4. İş Güvenliği ve Sağlığı Fuarı ve eş zamanlı düzenlenecek İş Sağlığı ve Güvenliği Sempozyumu’nun tüm taraflar için faydalı ve verimli olmasını hedefliyor.”

İstanbul Sanayi Odası İş Sağlığı ve Güvenliği Sempozyumu, TOS+H Expo 2022 ile eş zamanlı düzenlenecek.

TOS+H Expo, iş güvenliği ve sağlığı ihtisas fuarı olarak sanayi ve ticaret sektörlerinden uzmanları bir araya getirirken, İstanbul Sanayi Odası İş Sağlığı ve Güvenliği Sempozyumu güncel iş sağlığı ve güvenliği standartlarını konu alarak Türkiye ile komşu ülkelerdeki firmalarda önlem alma kültürünün oluşmasına hız kazandırmaktadır. TOS+H Expo 2022’ye şimdiye kadar 87 ulusal ve uluslararası katılımcı kayıt yaptırmış bulunuyor.

TOS+H Expo 2022 katılımcıları hakkında daha fazla bilgi için lütfen tıklayınız: Katılımcılar ve Salon Yerleşimi

Ayrıntılı bilgiye www.toshexpo.com.tr adresinden ulaşabilirsiniz.

İstanbul Sanayi Odası (ISO) için daha fazla bilgi: www.iso.org.tr/Home/ adresinde bulunmaktadır.


Detail

FOTEG | İstanbul Gıda İşleme Teknolojileri Uluslararası İhtisas Fuarı

Her 2 yılda bir gerçekleştirilen FOTEG İSTANBUL Gıda İşleme Teknolojileri Uluslararası İhtisas Fuarı, gıda işleme donanımı sağlayıcıları ile gıda üretim sektörü temsilcileri ve üst düzey yöneticilerinin buluşma noktasıdır. Fuar, dünyanın çeşitli ülkelerinden gelen katılımcı ve ziyaretçileriyle geniş bir pazar içerisindeki son eğilimleri öğrenmek için taraflara önemli fırsatlar sağlamaktadır.

Türk ekonomisi geliştikçe Türkiye, Avrupa ve Kuzey Amerika için gıda katkı maddeleri ihracatında büyük bir pazar haline geldi. Sektörde oluşan daha kaliteli katkı maddelerine ve daha çok lezzet çeşidine olan talebin artması nedeniyle FOTEG İSTANBUL bu kazançlı pazara girmek isteyenler için ideal bir sunum yeri oldu. Kaliteli gıda üretiminin ön koşulu olan kaliteli katkı maddelerini yakından tanımak, sektördeki en yeni ürünler hakkında bilgi sahibi olmak isteyen; daha yüksek standartları hedefleyen üreticiler, pazar paylarını arttırabilecekleri ve yeni aromalar keşfedecekleri etkin bir platform olan FOTEG İSTANBUL fuarında buluşmaktadırlar.

Ambalajlama ve lojistik, gıda sektörü için hayati önem taşıyan faktörlerdendir. Ürünleriniz ne kadar kaliteli olursa olsun, gelişmiş bir ambalaj ve lojistik sisteminiz yoksa kalitenizi korumak mümkün değildir. Son yıllarda Türkiye'de bu bilincin oluşmaya başlamasıyla, ambalaj ve lojistik sektörleri büyük önem kazanmış, bu alanda son çıkan ürünlere olan talep hızla artmıştır. Son yıllarda gıda ambalajlama makinaları ithalatı % 12'lik bir artışla hızla büyümektedir. FOTEG İSTANBUL ambalajlama, taşıma, depolama ve dağıtım konularında, dünyanın dört bir yanından gelen sektör profesyonellerini bir araya getirerek kazançlı işbirliklerinin oluşturulacağı verimli bir ticari ortamdır.

FOTEG İSTANBUL unlu mamuller üretim sektörünün en yeni ürün ve hizmetlerle buluşacağı, uluslararası iş bağlantıları kurabileceği ve bilgi alışverişinde bulunabileceği etkin bir platformdur.

Bilindiği gibi günümüzde insan sağlığı en önemli konudur. Sağlığımızı etkileyen çeşitli etmenlerin başında ise beslenmemizi sağlayan gıda ürünleri gelmektedir. Bu nedenle gıda işletmeleri; ürünlerin, güvenli ve hijyen standartlarına uygun şartlarda üretilmesi, bunun sürekliliğinin sağlanması ve tüketiciye sağlıklı koşullarda ulaştırılmasından sorumludur. Ayrıca üretilen tüm gıda ürünlerinin, her aşamada sağlığa ve uluslararası kalite koşullarına uygunluğunun belgelendirilmesi, hem iç pazar hem de Türkiye’nin gıda ihracatı açısından büyük önem taşımakta ve Avrupa Birliği ile entegrasyonda, gıda güvenliği ve hijyen en önemli konulardan biri olarak karşımıza çıkmaktadır. Bu aşamada; Ar-Ge merkezleri, gıda laboratuarları çalışmaları, bu çalışmalar için ihtiyaç duyulan yeni teknolojiler, cihazlar, donanım ve ekipmanlar, belgelendirme hizmetleri ön plana çıkmaktadır.


Detail

Truss Exhibition Stands

Truss Exhibition Stands Models and Types
Models and varieties of truss fair stands in fairgrounds are ideal for creating a healthy advertising space. The promotion process takes place on a solid ground.

In Which Sector Is Truss System Used?
Truss fair stands are ideal for creating a space where large-scale products will be exhibited. Widely used in automotive and industry. However, it can also be applied to different sectors.

What are Truss System Stands?
Models and varieties of truss exhibition stands, which have different features in terms of size, are frequently preferred. In the truss system, columns and beams create a highly functional space. The recognizability of the system is important in terms of giving a popularity message. Since it is detachable, it gives the opportunity to make changes easily. It should not be considered only for aluminum material. The lighting system is of a quality that highlights the product and service.

Truss Exhibition Stands Design and Planning
Truss truss system stands are produced by using aluminum density columns and beams that can be designed in desired dimensions.

Usage Areas of Truss Stands
The stands in question are demanded and preferred by many organizations because they are very modern, stylish and very functional. Truss truss system stands are indispensable for large organizations. It is used in television programs, concerts and many similar events. The reason why it is in demand so often is the perception of greatness it creates. Despite the perception of grandeur and splendor it creates, it is quite easy to install. Since the materials used in its manufacture are very light textured materials, its portability and installation are quite simple. Therefore, it is highly preferred.

Support should be sought from expert and experienced teams in the design and planning of Truss exhibition stands. It is right to work with designers and manufacturers who have carried out the design and planning processes of truss exhibition stands many times before, who are well-versed in their subject and can make them in desired scales and sizes.

Convenience Provided by the Modular Structure of Truss Stands
Those who are interested in Truss exhibition stands design and planning also know that this stand is highly modular and easy to set up. Due to its modular and practical structure, it is known to make unlimited desired designs.

Among the design and planning features of Truss exhibition stands, apart from being modular, they can be configured as desired by using the same parts and allow the unlimitedness of playing with their sizes. It is precisely because of this feature that it has become an indispensable stand of large, popular organizations. Although the materials used in its design are aluminum and various materials, they are extremely solid and extremely safe stands.

Impact of Truss Fair Stands
Truss exhibition stands are known to provide the necessary strength for the exhibition of large-scale vehicles due to their design and planning, being robust, highly durable, extremely safe and large.

They always prefer truss fair stands, especially if the products that companies will participate in the fairs and present are large-scale. Among the reasons why they prefer these stands, they are preferred because they are very suitable for displaying large, durable, easy-to-install and large-material products.

Truss exhibition stands are preferred because of the ease of combining the importance of design and planning with other systems used in terms of fairs, and the convenience created by enabling the desired customizations to be made. Regarding the design and planning of Truss exhibition stands, it is of course important to work with experts and experienced designers and manufacturers.

The Importance of Working with an Expert Team for Truss Exhibition Stands
It is also important that all parts necessary for the creation of truss fair stands, including the use of steel lattice elements of the desired length in the design and planning stages of truss fair stands, the provision of necessary connections, the connection parts and the accessories used, are made by expert teams.

In addition to Truss exhibition stands, when various illuminated cage systems are used, it becomes the most effective exhibition stand on the area where it is set up, and a feature that companies want has emerged. Every company wants the stand that will be the most effective, striking and focal point in the fair it participates in. This feature of their stands becomes very important in terms of its customers, potential customers, potential investors and competitors.

Apart from being the focal point of their stands at fairs, companies want areas where they can exhibit their products well, where they can meet and negotiate with their customers, and where tea and coffee services can be made. At this point, Truss exhibition stands are able to gather all these features that companies want in one pot, thanks to their size and design.


Detail

SAHA İSTANBUL

Türkiye’nin milli gelirinin yarısını üreten İstanbul Sanayisinin, Katma Değeri yüksek, teknolojik ürünler üretmesi amacı ile Kuzey Marmara koridorunda faaliyet gösteren 65.000 sanayici firmamızın gücünü, kümelenerek, ortak bir sinerji yakalanması hedefi doğrultusunda, 2015 yılı Mart ayı içinde, 27 kurucu üyenin girişimleri ile SAHA İstanbul ~ Savunma, Havacılık ve Uzay Kümelenmesi Derneği kurulmuştur. Küme merkez olarak Pendik’te bulunan Teknopark İstanbul’u seçmiştir.

Ancak ilerleyen süreçte çok hızlı bir büyüme kaydederek, Sırasıyla Deliklikaya Endüstri Bçlgesi DESB, Yıldız Teknik Üniversitesi İkitelli Teknopark, Teknopark Ankara-İvedik ve Gaziantep Sanayi odası SAHA İstanbul İrtibat Ofisleri açılmıştır.

Halen Türkiyenin bütün bölgelerinden üye alarak çok hızlı bir büyüme kaydeden SAHA İstanbul, bünyesindeki çeşitli sektörlerden ve şehirlerden  firma ve kamu ve vakıf üniversiteleriyle üniversiteleriyle Türkiye’nin ve üyesi olduğu Avrupa Havacılık Kümeleri Birliğinin en büyük kümelenmesi haline gelmiştir.

SAHA İstanbul bünyesinde SAHA İstanbul Teknoloji İktisadi İşletmesi'ni kurarak etkin faaliyetler icra etmek için altyapı oluşturmuştur.

2018 yılında ilk SAHA EXPO fuarını yerli bir fuar olarak başarıyla icra etmiş ve takip eden süreçte SAHA EXPO Fuarcılık A.Ş. yi kurmuştur. İki yılda bir icra edilecek Savunma Sanayi İhtisas Fuarı şeklinde uluslarası bir fuar olarak hem fiziki hem sanal ortamda devam edecektir. SAHA EXPO A.Ş. dünyanın ilk 3D Sanal Savunma Sanayi Fuarını gerçekleştirme başarısını göstermiştir. Kasım 2021 ayında hem fiziki hem sanal olmak üzere Dünyanın ilk hibrit Savunma Sanayisini yapma başarısını gösterecektir.

2019 yılında SAHA Akademiyi kurarak bünyesinde TÜBİTAK TÜSSİDE ile işbirliği içinde İstanbul, Ankara ve Gaziantep'de SAHA MBA eğitimlerine başlamışTIR. HALİHAZIRDA SAHA MBA dünyanın en prestijli programlarına denk içerik, araç ve yöntemlerle eğitimine devam etmektedir.

2020 yılında Dünya Sivil Havacılık Kalite Grubu - IAQG/Avrupa Sivil Havacılık Kalite Grubu-EAQG altında Milli Havacılık Endüstrisi Komitesi MİHENK'i kurarak Türkiye'yi Avrupa Sivil Havacılık Kalite mutfagına sokmuş ve TÜRKAK'ın yerli firmalarımızın AS 9100 belgesi vermesinin akreditasyonu yetkisini almasına zemin hazırlamıştır. 

2021 yılında SAHA GİRİŞİM'i kurarak Hazırlık Düzeyi 5 seviyesine gelmiş projelerin seri üretiminin sağlanabilmesi için yatırım almasına destek sağlayacak birim oluşturulmuştur. Projelerin yatırıma hazırlanma süreçleri ve doğru yatırımlar alarak sektöre ve ekonomiye kazandırılması hedeflenmektedir.

SAHA İstanbul bünyesinde projeler teknik komiteler altındaki proje grupları tarafından yürütülmektedir. Bu projeler ülkenin henüz sahip olmadığı teknolojileri kazanma maksatlı olabileceği gibi, mevcut ve fakat farklı sektörlere ait yeteneklerin konsolide edilerek özgün konseptlerde yeni ürünler geliştirme şeklinde de olabilmektedir.

Bunun yanısıra yine komiteler bünyesinde yürütülen Ur-Ge projeleri ile farklı üretim sektörlerinin ihracatını geliştirici gayretler yürütülmektedir.

Firmalarımızın savunma, sivil havacılık ve uzay projelerinde daha fazla yer almalarını temin etmek adına yeteneklerini bilinir kılmak, onlara pazar geliştirici gayretlerde bulunmak, parça, komponent, alt sişstem üreticilerini sistem ve platform üreticileri arasında işbirliğini geliştirmektedir.

Savunma Sanayiinin her dalında, havacılık ve uzay sanayiinde firmalarımızı yönlendirmek, bilgilendirmek ve onlara rehberlik etmek suretiyle kümelenmeler oluşturmak, böylece milli üretim yetenek ve kapasitemizi artırma idealinden hareketle firmalarımıza, ilgili kamu otoritelerine, bilim ve araştırma kurumlarına ve üniversitelerimize destek sağlamaktadır.

Çalışma Konularımız 

  • Üyeleri arasındaki iş birliğini artırmak ve ortak projeler yürütülmesi için altyapı oluşturmak, üretilen projelerden firmaları haberdar etmek
  • Henüz yurt içinde üretimi olmayan kritik sistemlerin/malzemelerin yerli imkân ve milli teknolojilerle üretimi için yetenek ve altyapı ihtiyaçlarına yönelik proje bazlı iş birlikleri oluşturmak
  • İhtiyaçların yerli ve milli imkanlar ile karşılanması amacı ile üye firmaları veya yetkin üye olmayan sanayi kuruluşları bir araya getirmek, konsorsiyum şirketleri kurmak
  • Teknik Komiteler oluşturarak savunma sanayinde kurum ve kuruluşların teknik, teknolojik ve işletme problemlerine çözüm getirecek tedbir ve çarelerin tespit etmek,
  • Firmaların ihtiyaç duyduğu parça ve ürün üretimleri, yazılımlar, kalite belgeleri gibi çeşitli alanlarda milli çözümler üreterek dışa bağımlılığını azaltmak,
  • Ulusal ya da Uluslararası projelere katılabilmeleri için, proje hazırlama ve katılımları aşamalarında, üyelerine ihtiyaç duyacakları her türlü desteği vermek,
  • Savunma ve Havacılıkla ilgili tüm devlet ve sivil kurum ve kuruluşlarla ortak çalışmalar yaparak, üyelerinin Savunma, Havacılık ve Uzay Projelerinde yer almalarını koordine etmek,
  • Üyelerinin yenilik ve Ar-Ge çalışmalarını güçlendirmek için kamu destek ve teşviklerinden etkin şekilde faydalanmasını sağlamak
  • Üye firmaların uygulama ve deneyimlerinin paylaşımı için platformlar geliştirmek
  • Yurt içi ve yurt dışı firmalarla talepleri doğrultusunda, üyesi bulunan imalatçı firmayı tanıştırmak ve gerektiğinde üyeleri için teminat ve referans temin etmek,
  • Savunma, Havacılık ve Uzay alanında mevzuat boşluğunu belirlemek ve boşluğun doldurulmasına katkıda bulunmak,
  • Üniversitelerin sahip olduğu teknik bilginin ticarileşmesi için sanayiye aktarımını organize etmek,
  • Resmi mercilerin derneğe verdiği, dernekle ilgili görevleri yerine getirmek,
  • Sektörün insan kaynağını güçlendirmek için "SAHA AKADEMİ"yi kurmak ve yönetimini sağlamak,
  • Sektör insan kaynağı envanterini kurmak ve geliştirmek için ilgili yurt içi ve yurt dışı eğitim kurumları ile iş birliği kurmak,
  • Sürekli eğitim için; çalışma programları, eğitimler ve destekleyici çalışmalar organize etmek, sektörün ihtiyacını karşılayacak nitelikli eleman yetiştirilmesine destek sağlamak,
  • Üyelerin rekabet gücünü artırmaya yönelik kurumsallaşma, finans yönetimi, kalite yönetimi, maliyet yönetimi, süreç yönetimi, pazarlama faaliyetleri gibi çeşitli konularda eğitim, bilgi ve tecrübelerini yükseltmek için faaliyetlerde bulunmak,
  • Üyelerimizin ve paydaş kurumların gerçekleştirdiği webinar ve çevrimiçi eğitimleri yayınlayarak organizasyonunu sağlamak,
  • Üretimin standartlara uygun olmasını sağlayacak tedbirleri tespit ile bunları üyelerinin istifadesine sunmak, uyulmasını sağlamak,
  • Üretim standartların hazırlanmasında ilgili kurum ve kuruluşlarla iş birliği temin etmek,
  • Ortak Test ve Belgelendirme Merkezleri kurmak,
  • Savunma sanayi alanında üyelerinin uluslararası kalite ve sertifikasyon sahipliğini arttırmak,
  • Savunma, havacılık ve uzay sektörlerindeki teknolojik ürünlerde milli standartlar geliştirilmesine yönelik katkı sunmak,
  • Siber güvenlik platformu oluşturarak; Siber güvenlik ürünleri geliştiren firmalara tasarım ve çözüm destekleri sağlamak,
  • Güvenlik teknolojileri üreticisi firmaların ürünlerinin içerik ve kalitesinin artırılması sağlamak ve sektörün ihtiyacı olan uzun dönem insan kaynağı sağlamak,
  • SAHA Girişim Merkezi Kurarak; Savunma sanayi firmalarını ihtiyaçları doğrultusunda teknoloji sahibi girişimcilerle eşleştirilerek, geliştirilecek çözümlerin ulusal-uluslararası pazarlara hızlı bir şekilde girebilmesini sağlamak
  • Ülkemizde ve dünyada Savunma, Havacılık ve Uzay Sektöründe faaliyet gösteren kurum ve kuruluşlar ile iş birlikleri başlatmak ve geliştirmek,
  • Uluslararası düzeyde ortak projeler yürütmek, teknoloji transferi ve ortak yatırım konularında birlikte çalışmak,
  • SAHA EXIM Projesi ile üyelerinin Savunma Sanayi’nde ihracat için gerekli eşikleri hatasız ve düşük maliyetli bir şekilde atlamasını sağlayarak ürün ya da hizmetlerini ihraç etmelerini sağlamak,
  • İhracat finansmanı için üyelerine danışmanlık hizmeti vermek ve pazarlama faaliyetleri için altyapı oluşturmak,
  • Dernek üyelerinin ortak ihtiyaçlarını daha uygun şartlarda temin etmesine yönelik çalışmalar yapmak, iş birlikleri geliştirmek,
  • Üretim maliyetlerini düşürmeye yönelik ortak satın alma platformları oluşturmak ve bunlar için gerekli faaliyetleri yürütmek,
  • EYDEP Programı ile; firmaların savunma sanayi içerisinde yer alabilmeleri için gerekli olan yetkinlikleri değerlendirmek ve firmaların gerektiği taktirde tedarik zincirinde zayıf halka olmalarını engellemek, firmaların zayıf yönlerin giderilmesine yönelik destekler sağlamak
  • UR-GE Projeleri ile firmalarının ürünlerine yurt dışından talep oluşturulması için ve firmalarının Uluslararası Alanda Rekabetçiliğinin Gelişmesi ve Gerekli Kalifikasyon Düzeyine Erişmeleri için Devlet Desteğini sağlamak,
  • SAHA EXPO’yu kurarak; savunma, havacılık, denizcilik ve uzay sanayine yönelik üretim yapan ana platform üreticilerinin, tedarikçilerin ve bu sektörlerde tedarikçi olarak yer almak isteyen firmaların bir araya geldiği bir platform oluşturmak
  • Üyelerini yurt içi ve yurt dışı ilgili organizasyonlarda temsil etmek, Ulusal/Uluslararası fuarlara katılmak, düzenlemek ve bunlara katılımları için üyelerini teşvik etmek,
  • Türkiye genelinde üyelerin Savunma ve Havacılık Teknolojileri, Ürünleri, Hizmeti ve Cihaz/Malzemeleri olmak üzere, ulusal ve uluslararası pazarlarda tanıtıcı ve rekabet gücünü artırıcı çalışmalarda bulunmak,
  • Üyelerin tanıtım ve pazarlama faaliyetlerinin yenilikçi, etkin, kaynak oluşturan ve sürdürülebilir olması için, tanıtım çalışmaları yapmak,
  • Üye ana yükleniciler, KOBİ ve yan sanayicilerin başarısını takip etmeye yönelik kriterlerin belirleneceği "Başarı Endeksi" Modelini oluşturmak ve uygulamak

Detail

AVM İÇ VE DIŞ STANDLARI

x

Detail

National Restaurant Association Show

turgla At this weeks #NRA2018 you’ll find us just to the left, up near the front, as you enter the North Hall in Booth 5507!
That’s where we’ll show you lots of new #dinnerware designs and much, much more to help you elevate your #foodpresentations! / McCormick Place, Chicago, IL / USA


Detail

FROM OUR CUSTOMER

Şengün Makİna İnş. ve Kırt.San.Tİc.Ltd.Ştİ.

Firmamız 1977 yılında makina elemanları imalatı olarak kurulmuştur. Mekanik makina elemanları konusundaki üretimimiz bizi kendi ürünlerimizi ve markamızı oluşturma hedefine taşınmış ve bu hedefi 1998 yılında şirketleşerek hızlandırdık. 1998 yılından itibaren Türkiye’de ilkleri üretmek amacıyla önce Hamur açma makinaları ile kendimizi ispat etmiş daha sonrada lahmacun, pizza ve pide vb. gibi ürünleri yüksek standartlarda pişirebilen fırınları ürettik. Fastfood sektörüne hizmet amacıyla kalite, verim ve yüksek teknolojiyi esas alan ürünler üretmek olan şirket bilincimiz ve amatör ruhumuzu hiç kaybetmemek için çabalıyoruz.

    Bugün 2000 m² ulaşan imalat tesisimizle Türkiye’nin önemli ve ünlü markalarının müşteri portföyümüze kazandırdığımız için çok mutluyuz.


Detail

Kanaat Biber

Dededen kalma arazilerde yaklaşık yarım asırdır biber yetiştiriciliği olan << Kanaat Biber>> 1985 yılında toptan gıda ve baharat sektöründe Gaziantep’in İslahiye ilçesinde faaliyete başlamıştır. Kendi arazilerinde yetiştirmiş oldukları biberleri işlemek amacı ile 1995 yılında Yeşilova köyünde 1.000 m2 alanı olan biber fabrikasını kurmuşlardır. Yaptığı işin kalitesinden dolayı artan talebe cevap verebilmek için ilk entegre tesisini 2000 yılında İslahiye ilçesinde 5.000 m2 alanda kurmuş ve günlük üretimini 25 tona çıkarmıştır. Geniş pazarlara hizmet verebilmek için ikinci kurutma tesisini 2009 yılında kurmuş ve günlük üretim kapasitesini yaklaşık 100 tona çıkarmıştır. << Kanaat Biber>> şuan ki 18.000 m2 lik fabrika alanı ve 8.000 m2lik kapalı alanı ile ülkemizin en geniş üretim tesisine sahiptir.

  Tüm yıl boyunca  Avrupanın çeşitli ülkelerine biber ihraç etmekte olan << Kanaat Biber>> ülkemizin dörtbir yanındaki toptancılara ve baharat firmalarına ürün tedarik etmektedir. İslahiye yöresinde yetişen biberleri özenle seçerek modern kurutma tesislerinde Gıda Kondeksine ve ISO 22000, ISO 9001 standartlarına uygun üretim yapmaktadır. Kurulduğu ilk günden itibaren hedefi sürekli kendini geliştirmek olan << Kanaat Biber>> BİBERCİZADE markasıyla tüm baharat çeşitlerine Kanaat güvencesiyle tpotan ve perakende sektörüne girmiştir. Bayilerine lojistik destek verebilmek için 20102’un ocak ayında Gimat şubemiz açılmıştır. Sürekli büyümeyi hedef haline getirdiğimiz için İvedik Organize Sanayi Bölgesinde toplam alanı 2000 m2 olan yeni yerimizde siz değerli müşterilerimize hizmete açmış bulunuyoruz. Müşterilerine ürünlerini daha iyi tanıtabilmek için İslahiye merkezde toplam 680 m2li 3 katlı fabrika satış mağazasının Temmuz 2010 açolışını yapmıştır.

Kanaat Biberin Hedefleri:  Kazancını yine baharat işine yatırarak sektöründe daima yenilikçi ve kaliteden ödün vermeden çalışanları ve bayileriyle büyümeyi ilke edinmiştir.


Detail

Bioaktif

Merhaba , Firmamız 1995 yılında kurulmuştur. 1999 yılında ortopedik soft ürünler üretimine başlamıştır. 2005 yılında Bioteks Dar Dokuma ve Tekstil Limited Şirketi'ni kurarak ortopedik elastik kumaşların üretimine başlamıştır. 2007 yılında düz örme bandajların üretimi için makine parkurunu kurmuş ve sektörde öncülük etmiştir. Biofix markasıyla üretmiş olduğu ortopedik soft ürünler bugün Türkiye ve dünya pazarlarında yerini almıştır. 2009 yılında Dünya lideri ÖSSUR firmasının Türkiye distribütörlüğünü alan firmamız, yüksek teknolojik ürünler üreten Össur firmasının ürünlerinin uygulanmasında ve satışında başarılı bir şekilde sektöre hizmet vermeye devam etmektedir. Sürekli gelişerek dünya standartlarında ürün üretmek amacıyla, yeniliğe,kaliteye ve taahhütlerimize bağlı kalarak hizmet vermeye devam ediyoruz. Önceliğimiz müşterilerimizin beklentilerinin üzerine çıkarak müşteri memnuniyetini üst düzeyde tutmaktır.


Detail

Apak Metal

Apak Metal AŞ, 15 yıllık; yurtiçi ve yurtdışı, bakır alaşımları ve takım çelikleri sektör tecrübelerinin bir araya geldiği profesyonel bir global-teknik-metal-markettir.

Geniş ürün yelpazesi ile hurdadan – ön alaşımlara, yarı mamulden – CNC de bitmiş parçalara; granülden – ingota, yuvarlaktan – lamaya, borudan – ringe, lamadan plakaya, standart ölçülerden – standart dışı ölçülere, mm den – inch e, dökümden – dövmeye, haddeden – ekstrüzyona,  toptandan – perakendeye bu metallerin;  kendi grup şirketleriyle, beraber üretim, satış, ithalat ve ihracatını yapmaktadır.

Şirketimizde öncelik kalite ve yeniliktir…

Yarının malzemelerini, bugünden sunuyoruz…


Detail

Hakerman İç - Dış Tic.Aş.

Bugün, Enfeksiyon kontrolü ve Sterilizasyon, Hastane Mobilyaları, Fizik Tedavi ve Rehabilitasyon, Tıbbi Atık yönetimi alanlarında üretim yapan dünyanın lider kuruluşlarını Türkiye tek yetkili distribütörü olarak temsil etmekte olan Hakerman, sektöre sunduğu ürünlerin kullanıcı eğitimini ve teknik servis hizmetini kalitesi belgelendirilmiş kendi uzman kadrosuyla vermektedir.

İçinde bulunduğumuz 2015 yılında sektörde 22. yılını kutlayan firmamız, EN-ISO 9001 standartlarındaki hizmetini güler yüzlü ekibi ve müşteriye özel ürünleri ile sunmakta olup; sağlık sektöründeki konumunu daha da ileriye taşımayı hedeflemektedir.


Detail

Motorfan Elektrik San.Tic.

Sektörün sayılı en eski üretici firmalarından biri olan MOTORFAN , 1992 yılında kurulmuş olup ankastre mutfak cihazları sektöründe  günden güne büyüyerek pazarda önemli bir paya sahip olmuştur . 

Uzun yıllardır kazandığı deneyim ve büyük yatırımları sayesinde ürün gamında bulunan duvar tipi ve ada davlumbazlar ile klasik ve ankastre aspiratörlerin aylık üretim kapasitesini 70.000 adede ulaştırmayı başarmıştır . 
Türkiye ve dünya piyasasında gerek OEM  , gerekse kendi markaları olan White Daisy , Masline , Exep , Punto Markalarıyla rekabet gücümüzü artırmaya devam etmektedir
Ayrıca satış sonrası hizmetlerini yurtçapında yayılmış yaklaşık 250 adet servis ağı ile gerçekleştirmektedir .
Yurtdışı piyasasında 45 ülkeye kendi marka ve OEM  olarak üretim yapan Motorfan katıldığı yurtiçi – yurtdışı fuar organizasyonları , pazarlama faaliyetleri ve dünya kalite standartları yolundaki ilerlemeleri ile ihracat hacmini günden güne artırmaktadır . 
İhracat işlemleri kardeş firma olan ASIL MOTOR VE KALIP SANAYI HUSEYIN AVNI GIRGIN  üzerinden gerçekleştirilmektedir.

Detail

Harmanlı Kimya

2008 yılında aile şirketi olarak kurulan firmamızın temeli 40 yıllık tecrübeye dayanmaktadır. Dünyada konularında lider; 

LOXEAL ENGINEERING ADHESIVES (Yapıştırcılar,sızdırmazlık ve kimyasal ürünler),  Q20 (Pas sökücü ve yağlandırıcı), PENOSİL ( silikon / mastik ve köpük) markalarında Türkiye mümessilliği yapmaktayız.

Harmanlı Kimya’nın patentli markası HERO mühendislik ürünleri( PU ve MS-POLİMER mastik vs… ) ürünlerini de Türkiye pazarına kazandırdığımız için ayrı mutluluk içindeyiz. Endüstri çapında  kalite olarak uluslararası standartları aşan bu ürünleri ülkemiz sanayisine kazandırdığımız için mutluyuz. Harmanlı şirketi olarak, ortak başarımız için daha iyi fiyatlarla ve kaliteli hizmet için yerel teknik destek ağımızı genişlettik.

Bizim için en önemli unsur Bilgi Transferi, partnerlerimizle ve kullanıcımızla daima dialog halinde olmamızdır.Ürün yelpazemizin kaliteli,yenilikçi ve satışı kolay olması için iyi fiyat ve iyi hizmet dengesine dikkat etmekle beraber ürün satışında partnerimize aktif destek vermekteyiz.


Detail

Kipsan
Asansör kabin teknolojisindeki tüm gelişmeleri yakından takip ederek gelişmelerimizi kendi sistemimize uyarlamak ve 'Sürekli Gelişme' felsefesi ile daima en iyiyi, en güvenli olanı ve en konforluyu müşterilerin hizmetine sunmak
 
   
      MİSYONUMUZ
 
Asansör, kabin ve diğer yönetmenlik şartlarına uymak.Tüm ürün projelerimizde ve bakım hizmetlerimizde insan güvenliğine önem veren kaliteli ürün ve hizmet sunmak müşteriyi ve çalışan memnuniyetini artırma çabasında olmak tüm çalışanlarımıza sürekli eğitim sağlamak ISO 9001 : 2000, CE gibi kalite yönetim sistemi şartlarına uymak sürekli iyileşme çabaları ile güvenilir bir marka olmak müşteriye en iyi hizmeti verecek serbest rekabet ortamında pazar payını sürekli artırmak.
 
Vizyonumuz ve Misyonumuz doğrultusunda :
  • Yeni teknolojileri takip etmek,
  • Müşteri beklentilerini karşılamak,
  • Zamanında ve hatasız üretim yaklaşımını benimsemek,
  • Eğitim ile çalışanlarımızın yetkinliğini arttırmak,
  • Çalışanlarımızla bir takım olmak,
  • Kalite yönetim sistemi standartlarının (ISO 9001 : 2000 ve CE) ve asansör yönetmenliğinin gereklerini karşılamasını, sürekli geliştirilmesini sağlamaktır.

Detail

Elkim Kauçuk ve Kimya Sanayi

Erkim Kimyevi Maddeler Sanayi ve Limited Şirketi 1985 yılında, tekstil konusunda yıllarca hizmet vermiş bir ekip tarafından %100  yerli sermaye ile kurulmuş bir firmadır. Tekstil sanayi için her türlü yardımcı maddeleri uluslar arası standartlara uygun olarak üreten, seçkin personeli, tam donanımlı araştırma ve kalite kontrol laboratuarları ve pilot tesisleri ile araştırma - geliştirme ve üretim yapan  Erkim Kimya; Çalıştığı alanın Türkiye için öneminin bilincinde olup, verdiği servis ve hizmetin uygunluğuna, hızlılığına büyük önem göstermektedir.

Satış öncesi, üretici ile kullanıcı arasında kurulan köprü amaca uygun sistemler, uygun fiyatlar ve satış sonrası verilen teknik destek ve kaliteli servis  Erkim Kimya tarafından temel görev olarak kabul edilmiştir. Yeni gelişmeleri  takip etmek Sürekli yeni ürünler geliştirmek ve müşterilerimize en iyi teknik servisi vererek taleplerini karşılamak yardımcı olmak,  müşterilerimizde verimliliğin artması için yeni ürünler geliştirerek katkıda bulunmak hedefimizdir.


Detail

ÖZ ALPER TEXTİL

Dünyanın Pijamasını üretmek için 1997 yılında yola çıktığımızda kendi markamızı yaratmak gibi bir hedefimiz vardı… Bugün emeğimizin karşılığını aldığımızı görmek bizi mutlu ediyor.

Özalper Tekstil olarak adımızı gerek iç pazarda ve gerekse dünya pazarında DowryFLZ ve Tor Men Ta markaları ile bay-bayan pijama grubu ve ev giyimi ürünlerinde tercih edilen bir marka olmamızda, hiç kuşkusuz ödün vermediğimiz kalite ve temel ilkelerimize olan bağlılığımızın büyük payı var.

Özalper Tekstil olarak, günün teknolojisini yakından takip ediyor, modern üretim parkurumuz ve ARGE birimimiz ile üretimin her aşamasında teknolojiye sürekli yatırım yapıyoruz.

Biz;

- Ürün ve hizmetlerimizi evrensel kalite ve standartlarda sunmayı amaçlarız,

- Müşterilerimiz ve çalışanlarımız için güvenilirlik ve sürdürülebilirlik simgesi olmayı hedefleriz,

- Bizim üretim ve yönetim süreçlerimizin her aşamasında “önce insan” prensibimiz vardır,

- Sürdürülebilir bir gelişim için kaynak yaratmayı hedefleriz.

- Doğanın korunmasına özen gösteririz.

Özalper Tekstil olarak adımızı ve kazanımlarımızı Türk Pijama sektörünün geleceğine taşımayı hedefliyor, sizleri de yanımızda görmeyi diliyoruz.


Detail

Alone Çanta Saltıkoğlu

Her zaman müşteri memnuniyeti ve kaliteyi ön planda tutan Saltıkoğlu Saraciye; müşteri ihtiyacına göre Türkiye ve dünyadaki değişimleri takip edip, teknolojik gelişmelere ayak uydurarak ürün kalitesini sürekli iyileştirip yükseltmektedir. Üretimde ve kalitede lider firmalardan biri olmak ve teknolojik yatırımlarla istihdam avantajları sağlayarak ülke ekonomisine katkıda bulunmak vizyonu ile 1979 yılında üretime başlayan Saltıkoğlu Saraciye, 2000 yılından itibaren ALONE markası ile yoluna devam etmektedir. ALONE, 2005 yılında tüm ürünlerine 1 yıl garanti veren tek marka olarak sektörde bir ilke imza atmıştır. Ve yine ALONE, tüm ürünlerini sağlık standartlarına uygun olarak tamamen yerli üretim yapmaktadır. Bugün sektörün sürekli büyüyen markası ile ALONE, her sezon yenilenen ürünlerini kalitesi ve koşulsuz müşteri memnuniyeti ile hem iç hem dış pazara sunmaya devam etmektedir.


Detail

Canoğlu Debriyaj Sanayi

Canoğlu Balata Otomotiv Sanayi ve Ticaret Ltd. Şti. 1994 yılında halihazırda otomotiv sanayinin önemli bir merkezi olan Ostim - Ankara’da kurulmuştur. İlk olarak üretimine tüm ticari araçlara ait balata üretimiyle başlayan Canoğlu Balata Otomotiv Sanayi ve Ticaret Ltd. Şti. günümüzde uluslararası önemli markalardan Mercedes-Benz, Volvo, DAF, Renault, Scania, MAN, BMC, Isuzu, Iveco, Otoyol, Ford, Chrysler üreticilerine ait ticari araçlar için debriyaj baskı takımları, 215-430mm çaplarında balata diskleri ve debriyaj rulmanları üretmektedir.

Canoğlu Balata Otomotiv Sanayi ve Ticaret Ltd. Şti.’nin ticari bir markası olan CDS™ Debriyaj Sistemleri, uygun fiyat politikası, üstün kalitesi ve uzun ömrü ile gerek yurtiçi gerekse yurt dışındaki seçkin bayilerce tercih edilen bir ticari marka olmuştur. Bütün CDS™ Debriyaj sistem ürünleri, teknolojinin en üst noktasındaki cihaz ve ekipmanlarla tasarlanıp üretilmektedir. Tüm üretim sürecinde, üretim hassasiyeti ve titiz denetimlerle beraber, müşterilerimize dünya standardında ürünler sunabilmek için ileri düzey teknoloji imkanları kullanılmaktadır.

Geçen sürede Canoğlu Balata Otomotiv Sanayi ve Ticaret Ltd. Şti., 5.000m²’ lik üretim alanına sahip fabrikasında yıllık üretim kapasitesini 50.000 adete çıkartmıştır. Canoğlu Balata Otomotiv Sanayi ve Ticaret Ltd. Şti. üretimini TSE standartlarına göre yapmaktadır. Bunun yanı sıra, ISO 9001- 2008 kalite belgesiyle dünyada güven duyulan şirketlerden biri olmuştur.

CDS™ Debriyaj Sistemleri ürünleri, pazara sunulmadan önce son işlem olarak, son teknoloji ile donatılmış Canoğlu Balata Otomotiv Sanayi ve Ticaret Ltd. Şti. laboratuvarında test edilmekte ve ürünlerin ölçümleri yapılmaktadır. Bu yöntem, ürünlerimizin kalite güvencesinden emin olunmasını sağlamaktadır.

Müşteri memnuniyeti, Canoğlu Balata Otomotiv Sanayi ve Ticaret Ltd. Şti.’nin en önemli kriteridir. Satış ağındaki deneyimli satış ekipleri ile müşteri memnuniyetine odaklanarak üstün kalite ve uygun fiyat olanakları müşterilere sunulmaktadır. Canoğlu Balata Otomotiv Sanayi ve Ticaret Ltd. Şti. ürün kalitesini arttırmak için sürekli olarak çalışmalarını sürdürmekte, son derece şeffaf ve etkili hizmet verebilmek için yeni bakım anlaşmaları yapmakta, müşterilerine zamanında ürün temini ve uygun fiyat garantisi sunmaktadır.

Canoğlu Balata Otomotiv Sanayi ve Ticaret Ltd. Şti., sürekli değişen müşteri isteklerini karşılamak ve müşteri memnuniyetini sağlamak için etkin ikili görüşmelerin önemli olduğuna inanmaktadır. Satış öncesinde ve sonrasında müşterilere ait özel isteklerin karşılanmasını sağlamak için yeni gelişmelerin takibi, marka stratejisinin en önemli noktası olarak görülmektedir. Canoğlu Balata Otomotiv Sanayi ve Ticaret Ltd. Şti. Türkiye’ de ve yurtdışında daha büyük bir marka olmayı hedeflemektedir. Yurtiçi ve yurtdışı pazarlarda, ürünlere karşı gösterilen memnuniyet, Canoğlu Balata Otomotiv Sanayi ve Ticaret Ltd. Şti.’nin daha büyük bir dünya markası olmak için doğru yolda olduğunun en önemli göstergesidir.


Detail

Emek Yağ Sanayii A.Ş.

1929 yılında Ahmed ve Said Beyler tarafından Bursa’nın Tirilye beldesinde kurulmuş olan Emek Yağ, günümüzde Mudanya ilçesindeki üretim ve dolum tesisinde hizmet vermektedir. Üretime zeytinyağı ve sabun ile başlamış olan firma, zamanla bitkisel yağ ve doğal sabun portföyünü genişletmiştir.Bugün evlerde ve profesyonel mutfaklarda kullanılan Emek Yağ ürünleri; ayçiçek yağı, mısır yağı, sızma ve riviera zeytinyağı, kızartmalık yağ ve bitkisel susuz yağdır. Bunların yanı sıra markanın doğal banyo sabunu, zeytinyağı sabunu ve sıvı zeytinyağı sabunu da bulunmaktadır.

Firma, kurulduğu günden beri ürün kalitesinden ödün vermemeyi değişmez kuralı olarak belirlemiştir. Bu amaçla teknoloji ve kalite odaklı yatırımları ile AR-GE ve ÜR-GE çalışmalarına titizlikle devam etmektedir. Üretimde ısıyı düşük tutarak yağdaki besin değerlerinin (Vitamin A,D, E,K) korunmasını sağlayan Ice-Condensing teknolojisini Türkiye’de ilk uygulayan firmalardan biridir. Ürün geliştirmenin yanı sıra, yağ kayıplarının ve çevre atıklarının azaltılması için de AR-GE çalışmalarını sürdürmektedir. Bu konuda; özellikle doğal kaynakların korunması amacıyla, üretim sürecinde uygulanan çevre koruyucu teknolojiler ön plana çıkmaktadır.

Bünyesindeki Royal Academy FAPAS onaylı laboratuarlarında kalite kontrol testlerini durmaksızın sürdüren Emek Yağ; ürünlerindeki kalite ve güvenlik standardını korumak için bilimsel verilere dayalı önleyici yaklaşım, açık iletişim, takım çalışmaları ve aralıksız denetimlerle titiz bir biçimde çalışmaktadır.

 Ana tesisinin bulunduğu Bursa’da pazar lideri olan Emek Yağ, Bursa çevre illeri yaygın olmak üzere Anadolu’nun çeşitli bölgelerine dağıtım yapmakta ve temsilcilikler vermektedir.


Detail

HUZUR HIRDAVAT

Temelleri 1983’e dayanan Ergüneş Group başarılı geçmişiyle kendi branşında Türkiye’nin önde gelen grupları arasında yer almakta ve hizmet sektöründe bölgesel lider olma vizyonuyla hareket etmektedir.

Kimya, Demir-Çelik, Tekstil, Plastik ve Mobilya Malzemeleri tedarikçiliği olmak üzere beş sektörde faaliyet göstermektedir. Ergüneş Group ayrıca mevcut hizmetlerin yanı sıra güncel yatırımlarlada ilgilenmektedir.

Ergüneş Group’un ulaştığı başarının, arkasında müşteri odaklı ve verimliliği merkez alan bir yönetim yaklaşımı vardır. Bu yaklaşım sadece maddi kazanımlarla değil, bütün toplumun yararlandığı ve kurumsal yurttaşlık bilinciyle iç içe gelişmektedir.

Ergüneş Group markalarının değerini sadece Türkiye sınırları içinde değil bölgesel ve küresel ölçekte de yükseltmeyi hedeflemektedir.

Hizmet verdiği tüm ara iş kollarında, uluslar arası güçlü işbirlikleri ile yoluna devam eden Ergüneş Group dünya standartlarında 11 marka ile faaliyetlerini sürdürmektedir.


Detail

Sofora Dış Ticaret Ambalaj Ltd. Şti.

Ambalaj ve gıda piyasasına rekabetçi fiyatları ve kaliteli mallarıyla ihtiyaçlara uygun hizmet vermektedir. 
Sofora’nın ana faaliyet alanı iç piyasadan aldığı ve uzakdoğudan ithal ettiği ev içi ve ev dışı kullan-at tipi tüketim mallarını yurtiçi ambalaj ve gıda sektörüne pazarlama ve satışını yapmaktır. Bunun yanısıra, uluslararası kalite standartlarında, rekabetçi hammadde, parça, yan ürün, ürün satınalma ve bu ürünleri yurtiçine pazarlama, uluslararası kalite belgeli üretici firma belirleme ve seçme, uzakdoğudaki üretici firmalar ile uzun vadeli kontrat bazında stratejik iş birlikleri oluşturma, üretim tesisi satın alma ve yatırım olanakları sağlama, kalite kontrol, sevkiyat takibi gibi hizmetleri de yapmaktadır. 
Sofora,'Doğru Adresiniz' sloganı ve kalitesiyle sizlere hizmet sunmaktadır.


Detail

Roma Plastik

Türkiye, Balkanlar ve Ortadoğu'nun lider, dünyanın en büyük 3.kenarbandı üreticisi Roma Plastik, 1996 yılında kurulmuştur. Gebze'de yer alan fabrika, aynı çatı altında ABS, PVC, PMMA ve Alüminyum Kenarbandı üretimi yapabilen ilk ve tek tesis olma özelliğini taşımaktadır. 2001 Yılında ihracat yapmaya başlayan Roma Plastik, Türkiye'de %40 pazar payına sahip olmakla birlikte, 5 kıtada 70'ten fazla ülkeye ihracat yapmaktadır.

Roma'nın başarısı; sıkı üretim standartlarını sağlayan yüksek kaliteli ham madde kullanımı, Batı Avrupa'dan tedarik edilen makine gücü, ISO 9001 ile uyumlu kalite kontrol ekibi, tüm sunta/mdf ve plakalara uygun renk çalışmalarını yapan deneyimli bir tasarım departmanı, özellikle müşteri hizmetleri ve tüm birimlerde özverili ve dinamik takım çalışması şeklinde özetlenebilir.

 
Roma Plastik 800'den fazla çalışanı ve hedef pazarlardaki Satış Ofisleri ile müşteri ihtiyaçları ve pazar taleplerine "Toplam Kalite" prensibi ile en hızlı ve güvenilir şekilde cevap vermek için çalışmaktadır.

2010 yılında Avrupa'nın önde gelen ahşap bazlı malzeme üreticisi Egger Grubu'na katılması ile Roma Plastik çok daha büyük bir aileye dahil olmuş ve Türkiye'deki yatırımlarını, dünya pazarındaki etkisini arttırmıştır. 


Detail

ÖZYUKSEL DERİ SANAYİ ve TİC. A.Ş.

OZYUKSEL DERİ SANAYİ ve TİC. A.Ş. gelişmiş, son derece modern üretim tesislerinde çanta, ayakkabı, deri döşeme ve deri giyim sektörlerine 180-200 modern, klasik ürün çeşitiyle hizmet vermektedir. 

Geniş renk skalamız, farklı ürünlerimiz, özel tasarımlarımız ve yenilikçi yaklaşımlarımız firmamıza deger katan unsurlardır.

Dünya pazarı üzerinde her geçen gün saygınlığını ve kalitesini olgunlaştıran firmamız, iç piyasada geçmişten bugüne taşıdığı kaliteli hizmetini devam ettirmektedir.

Halen ikinci jenerasyonla faliyetlerini sürdüren firmamız , devamlı yenilik felsefesi dogrultusunda ticari yaşantısını sürdürmektedir.

1980 yılında kurulan firmamız geçmişten bugüne kalite standartı ilkelerinden ödün vermemektedir.


Detail

Üçgen Yayıncılık

2007 yılında kurulan ÜÇGEN YAYINCILIK, ürün çeşitliliği, tasarım farklılıkları, kalite anlayışı ve satış sonrası hizmetleri ile Türkiye’nin saygın markaları arasında yer alarak sektöre katma değer sağlamaya ve yeni yayınlar yapmaya devam ediyor.

Tüketici odaklı yaklaşımı ile eğitim sektörüne ihtiyaç ve beklentilerini her noktada ürünlerine ve hizmetlerine en iyi şekilde yansıtan ÜÇGEN YAYINCILIK, yeni eğilim ve trendleri öngörerek tüm üretim ve hizmet süreçlerini sürekli geliştiriyor. Yenilikçi çizgisi ile modern üretim ve pazarlama anlayışını sektördeki deneyimi ile birleştiren ÜÇGEN YAYINCILIK, aynı zamanda eğitim sektöründe standartları sürekli yükseltmeyi hedefliyor.


Detail

RICHCORN | FOUR H DIŞ TİC.LTD.ŞTİ.

Rich Corn FOUR H DIŞ TİCARET LİMİTED ŞİRKETİ Ürünüdür. Amacımız dünyanın en iyi gurme patlamış mısırını üretmektir. Üretim süreci için yüksek kaliteli Makine ekipmanları kurduk. Ürünümüzü yapmak için en yüksek standartlarda hammadde kullanacağız. Patlamış mısırımız havalanacak ve Karamel sosumuz en iyi malzemelerle el işi olacak.

Planımız Patlamış Mısırımızı 12 temel aroma ile piyasaya sürmek ve Pazar trendlerine göre Lezzet çeşitlendirmemizi genişletmeye devam edeceğiz.

Lezzetlerimiz Peynirli Mısır , Tereyağlı , Tuzlu Karamel ,Karamelli Fıstık, Karamel Kaju , Karamelli Badem , Kakao , Şeker, Blue berry , Pina colada, Meyve karışımı olacaktır.


Detail

CATAGORY

HOME PAGE

Ideal Architecture; Interior Architecture | Exhibition Stand Design | Wood | Modular | Maxima | Congress | Exhibition stand services.


Detail

SERVICES

Ideal architecture; All wood, modular, maxima stand and interior design services


Detail

CONTACT


Detail

Contact Info

Fast service with its proximity to the exhibition center in Istanbul Avcılar


Detail

Site Map


Detail

Fairgrounds

We provide installation services for all exhibition stand area in Turkey and the world.


Detail

News


Detail

Wood Exhibition Stand

Wooden exhibition stands | Fair Stand Design, Fair Booth Rental and Fair services are all services in the sector.


Detail

Modular Exhibition Stand

Modular exhibition stand design and implementation services.


Detail

Maxima Exhibition Stand

Maksima exhibition stand design, rental and maxima exhibition stand application services.


Detail

Product Display Stand

Product display stands design and implementation services.


Detail

Company Exhibition Services

Corporate exhibition stand and equipment manufacturing, sales and rental services.


Detail

Fair Exhibition Hire Services

Corporate exhibition stand and equipment manufacturing, sales and rental services.


Detail

Hostess Rental

Exhibition Hostess, Hostess Translator, please contact us for your needs Hostess Service.


Detail

Floor Coverings

Exhibition stand ground lease and purchase services.


Detail

Fair Stand Application Form

Lets quickly offer our online request form Exhibition.


Detail

Design Projects

Enterprise architecture, exhibition, interior and exterior of your project, 3d, 2d design applications


Detail

Implemented Projects

Corporate References; Architecture, exhibition, interior and exterior design applications.


Detail

Stand Moving and Storage

Your stand is provided hire and storage services.


Detail

Stand Services Sector

All organizations sell to rent booth space for your internal and external service


Detail

Videowall screen

VIDEOWALL - Led Display - Led Wall - Led Panel, Outdoor Led Display - Indoor Led Display - Exhibition Stand Videowall


Detail

Truss Fair Stand

Truss Exhibition Stands Models and Types Rental


Detail

Ideally Architecture

Ideally Architecture

ideal Architecture; It has been serving for many years with its professional team of 30 people in the field of stand design and application.
It has aimed to make quality, meticulousness and the seriousness it has shown to its work as a company principle, and has accomplished successful works on the way to getting better day by day.
Fair organizations have gained serious importance in our country in recent years, and with the participation of corporate companies, fair stand design and application has improved in this area.
It offers the best stand design and applications you need in fair organizations, whether for rental or sale, to our customers. It carries out original and/or system stand designs and projects with its professional architects and engineers, and it carries out production and applications on time with its experienced team.
The design of modular stands and wooden stands, 3D projecting and graphic works within our own structure are carried out by our architects, and with their static calculations, projects that best express the corporate identity of the company in the fairground, do not ignore the quality factor in terms of materials.


Detail

GALLERY

Sayfa Başı